Parker P1075PA01SLM5AL00E0000000 Mobile Pumps

The Parker P1075PA01SLM5AL00E0000000 Mobile Pumps are the perfect choice for any engineer who needs a reliable and durable pump. With a wide range of features and a robust construction, these pumps are ideal for a variety of applications.

Get a quick quote

The Parker P1075PA01SLM5AL00E0000000 Mobile Pump is engineered for the food and beverage industry. It is a double suction, positive displacement pump designed to handle viscous, sticky or free flowing fluids. The maximum operating speed on this pump is 2200 RPM.

These mobile pumps are powerful enough to handle any water-related job, be it sewage, well, septic system or pool. These high-quality and dependable pumps are engineered to work in the most rugged conditions.

Feature:

1) Parker P1075PA01SLM5AL00E0000000 Mobile Pumps are a cost-effective

2) The Parker P1075PA01SLM5AL00E0000000 Mobile Pumps can be used to pump in fluid when a tank is too high up, or out of reach.

3) With our pumps, you can use water with higher levels of hydrogen sulfide, sulfuric acid and other strong chemicals and oils.

Parker P1 Medium Pressure Mobile Hydraulic Piston Pumps for open-circuit mobile applications increase productivity and improve the working environment with a robust cradle-bearing design, wide temperature range, full power thru-drive capability and an optional torque limiter. Featuring unique “ripple chamber” technology, P1 variable displacement pumps minimize pressure pulsations and decrease noise. With lower power consumption and reduced heat, the series ensures reliable performance and efficient control.

Learn more about Parker P1 Pump service and benefits under Product Support.

Markets:

• Mobile

• Oil & gas

• Material Handling Equipment

• Agriculture Machinery

• Construction Equipment

• Forestry Equipment

• Other Mobile

• Turf Equipment

• Vocational and Municipal Equipment

• Bus & Coach

• On-Highway Vehicle (Not Bus/Coach)

• Rail

• Transit Authority

Benefits:

• Increased productivity

• Proportional electric controls that provide flow on demand

• Large stroking pistons for fast, stable response

• Full power thru-drive capability

• Improved reliability

• Elastomer seals that eliminate gaskets and external leakage

• Low friction cam and taper-roller shaft bearings

• Industry-low viscosity capability

• Design flexibility

• Case drain port for horizontal or vertical shaft-up mounting

• Optional maximum and minimum volume stops

• End or side inlet and outlet ports

• Small envelope size

• Wide range of controls

• Ease of use

• Low noise nine-piston design

• Hydraulic controls with “no leak” adjustments

• Fewer parts for easier maintenance

Applications:

• Fan Drives

• Fire Trucks

• Concrete Pumps

• Chemical Pump Trailers

• Backhoes

• Bulldozer

• Front Loaders

• Winches

• Log Splitters

• Casing Jacks

• Cargo Winches

• Material Grinders/Chippers

Technical Characteristics:

• Maximum operating pressure of 280 bar (4,060 psi)

• Speed range of 600 – 1,800 rpm

• Available in 7 displacement (cc) options: 18, 28, 45, 60, 75, 100, 140

Technical Specifications

Maximum Vacuum Flow Rate	N/A
Operating Pressure	280 bar, 4000.0 psi
Technology	Hydraulics
Flow Rate	278 L/min, 73 Gal/min
Displacement	140 cm3/rev, 8.5 inch3/rev
Body Material	Cast Iron
Drain Option	YES
Charge Pump Included	No
Circuit Path	OPEN
Configuration	Single, Tandem, Multiple
Control Method	Presure Limiter, Load Sense, Electronic Control, Unloading, Proportional, Fan Drive
Energy Recovery Capability	YES
Filter Included	NO
For Fluid Type	Standard Hydraulic Fluid
Maximum Displacement	140 cm3/rev, 8.5 inch3/rev
Maximum Flow Rate	73 Gal/min, 278 L/min
Maximum Fluid Temperature	95 °C, 200 °F
Minimum Fluid Temperature	-40 °C, -40 °F
Maximum Noise Level	87 dBA
Maximum Operating Pressure	280 bar, 4000 psi
Radial Load Capacity	160-594 lb-ft
Maximum Operating Speed	3300 RPM
Maximum Kinematic Viscosity	NA
Minimum Kinematic Viscosity	NA
Weight	14 – 82 kg, 30 – 180 lbs
Media	Hydraulic / Liquid
Mounting Option	SAE, ISO
Port Connection	SAE, ISO, BSPP
Port Type	FLANGE, STRAIGHT THREADED
Port Location	Side Ports \| Rear Ports \| Opposing Ports
Pump Type	Piston, Variable
Direction of Rotation	Clockwise, Counter Clockwise
Sensor Type	Displacement & Pressure
Shaft Type	SAE, ISO
Thru-Drive Capability	YES