Parker TF0080HW260AAAB Duty Clutch Motor

Parker TF0080HW260AAAB Duty Clutch Motor

Parker TF0080HW260AAAB is a duty clutch motor that features a closed loop current control. It has an overload protection and a self-adjusting torque limiter, which maintains constant speed under varying loads. It works on 230V/60Hz and has an AC output of 320W with 30 Nm of maximum torque.

The Parker TF0080HW260AAAB Duty Clutch Motor is a high torque motor perfect for any clutch application. With a working voltage of 230 volts, this motor consumes a maximum of 1.125 amps per horsepower. Mounting screws are included for easy installation.

Feature:

1) Provides more power to the system

2) Delivers durability, reliability and service life in one powerful package.

3) The Parker TF0080HW260AAAB Duty Clutch Motor will last a lifetime with its heavy-duty construction.

4) A higher quality product, which means it lasts longer and reduces the need for more frequent replacements

5) Parker TF0080HW260AAAB is a clutch motor that has been designed and manufactured to the highest standards in quality and reliability. The motors are designed for a variety of applications and are available in both single and three-phase versions.

The Torqmotor™ TF Clutch Series low speed, high torque motor is ideal for applications where a freewheeling output shaft is required for some part of the duty cycle. Pressure at either work port connects the motor and shaft. With no pressure at the motor ports, the TF Clutch Series motor is separated from the output shaft which can freewheel. Pressure at either motor port couples the motor and shaft. The motor section of the unit is separated from the output shaft/bearing package by springs. When hydraulic pressure is applied to either motor port, the springs are compressed, coupling the motor section to the output shaft/bearing package, and the unit operates as a motor. When pressure is lost at both motor ports, whether by design or inadvertently, the motor stops rotating and the springs separate it from the output shaft/bearing package. The output shaft then can freely rotate.

This rugged Low Speed High Torque (LSHT) orbital motor features robust construction and continuous oil flow across the splines for longer life, superior side load capacity, and smooth extra low speed operation. A high pressure shaft seal is standard. Its innovative design eliminates the need for a case drain. Dependability is based on high quality design and manufacturing. Designed and manufactured in Greeneville, TN USA.

Markets:

• Agriculture Machinery
• Construction Equipment

Benefits:

• Integral clutch for freewheeling operation
• Intermittent pressures to 4000 psi
• Torques to 7000 lb-in
• Shaft size 1.25 inch
• Robust construction for longer life
• Continuous oil flow across internal splines for longer life
• Superior side load capacity
• Smooth, extra low speed operation
• High pressure shaft seal is standard
• Innovative design eliminates the need for a case drain
• Dependability based on high quality design and manufacturing
• Designed and manufactured in Greeneville, TN USA

Applications:

• Grain Harvesting Conveyors
• Sickle Drives

Technical Specifications

TF Series Medium Duty Clutch Motor Document Download

     TF Series Medium Duty Clutch Motor Catalog