Menu
Parker 3269110401|PGP315A193*FXAB10-96* Cast Iron Pumps
The Parker 3269110401|PGP315A193*FXAB10-96* cast iron pump is a reliable, durable and cost-effective solution for a variety of applications. With a flow rate of up to 96 GPM, this pump is ideal for use in industrial and commercial settings. The cast iron construction ensures long-lasting performance, while the AB10-96* FX series motor provides efficient, trouble-free operation.
Get a quick quote
Parker 3269110401|PGP315A193*FXAB10-96* Cast Iron Pumps
Parker PGP315A193*FXAB10-96* Cast Iron Pumps are designed and manufactured to NACE TM0167/ISO 15156:2010.
Parker Pumps are used worldwide.
Feature:
1) Direct replacement of Parker 3269110401|PGP315A193*FXAB10-96* cast iron pumps.
2) The Parker 3269110401|PGP315A193*FXAB10-96* is designed for lower pressure applications, low leakage and high vacuum capabilities.
3) The Parker 3269110401|PGP315A193*FXAB10-96* Cast Iron Pumps are durable and can be used in a wide range of applications.
4) Parker 3269110401|PGP315A193*FXAB10-96* Cast Iron Pumps are the perfect choice for maximum performance and reliability.
5) 100% Non-Clogging, Rust Proof.
Parker’s 315 series fixed displacement gear pumps offer high pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump.
Markets:
• Aerial
• Agriculture Machinery
• Construction Equipment
• Forestry Equipment
• Material Handling Equipment
• Turf Equipment
• Vocational & Municipal Equipment
• Mining
• Oil & Gas
Benefits:
• Three-piece cast iron construction for distribution flexibility
• Cast Iron construction for durability
• Balanced Thrust Plates minimize friction and leakage
• Journal bearings for long life
• Multiple sections available
Applications:
• Power steering pumps
• Tire Trucks
• Salt and sand spreaders
• Aerial Lift
• Low boy trailers
Technical Specifications:
• Flow range to 32 gpm (121 lpm) per section
• Displacements from .465 to 2.48 cir (7.6 to 40.6 cc/rev)
• Operating pressures up to 241 bar (3,500 psi)
• Speeds up to 3,000 rpm
• Volumetric efficiencies up to 98%
• CW, CCW, and Bi-rotational pumps available
• SAE and SI shafts, flanges and porting available
• Multiple section, as well as Cross frame add-a-pumps
• Extensive integrated valve capabilities
– Load sense flow control
– Relief with anti-cavitation check
– Priority flow control
– Solenoid unloaded relief valve
– Accumulator charge (single and dual)
– Check valve with restrictor
Technical Specifications
| Operating Pressure | Up to 3500 psi, Up to 241 bar |
| Flow Rate | NA |
| Displacement | Up to 41 cm3/rev, Up to 2.5 inch3/rev |
| Body Material | Cast Iron |
| Drain Option | No |
| Charge Pump Included | No |
| Circuit Path | Open |
| Configuration | Single / Tandem / Multiple |
| Control Method | Relief, Load Sense, Priority, Unloader |
| Energy Recovery Capability | No |
| Filter Included | No |
| For Fluid Type | Standard Hydraulic Fluid / Phosphate Ester / Water Glycol |
| Maximum Displacement | 41 cm3/rev, 2.5 inch3/rev |
| Maximum Flow Rate | 32 Gal/min |
| Maximum Fluid Temperature | 80 °C, 180 °F |
| Minimum Fluid Temperature | -20 °C, 0 °F |
| Maximum Operating Pressure | 241 bar, 3500 psi |
| Radial Load Capacity | Consult Parker, Consult Parker lb |
| Maximum Operating Speed | 3000 RPM |
| Maximum Kinematic Viscosity | 7500 SUS |
| Minimum Kinematic Viscosity | 50 SUS |
| Weight | 10 kg (Max), 22 lb (Max) |
| Media | Liquid |
| Mounting Option | SAE | ISO | DIN |
| Port Connection | SAE | ISO | NPT | BSPP | ODT |
| Port Type | FLANGE | STRAIGHT THREADED | |
| Port Location | Side Ports | Rear Ports |
| Pump Type | Gear, Fixed |
| Direction of Rotation | Clockwise | Counter Clockwise | Bi-Rotational |
| Shaft Type | SAE | ISO | DIN | Industry Specific |
| Thru-Drive Capability | No |
PGP315 Series Cast Iron Pumps Document Download
PGP315 Cast Iron Pumps Product Catalog
